Xerox Phaser 6300 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 6300 Top Searches

These results are ranked by popularity.

Error
196Description: Replace Imaging Unit or Imaging Unit Is Near End of Life The Imaging Unit Life counter indicates the Imaging Unit is near or has reached its end of life.
40 ... 43Description: Fuser Failure The Fuser temperature regulation has failed. Code 40: The temperature sensor sensed an overheat condition. Code 41: The temperature sensor sensed a low temperature condition. Code 42: Temperature sensor not providing an output.
106Description: Motor Failure One of the primary drive motors has failed.
80Description: Disk Failure An error was detected in the Hard Disk.
159Description: Misfeed at Tray 5: Jam T5 Paper being fed from the 1100-Sheet Feeder did not reach the Registration Sensor on time.

Xerox Phaser 6300 Common Errors

The most common error codes.

Error
196Description: Replace Imaging Unit or Imaging Unit Is Near End of Life The Imaging Unit Life counter indicates the Imaging Unit is near or has reached its end of life.
40 ... 43Description: Fuser Failure The Fuser temperature regulation has failed. Code 40: The temperature sensor sensed an overheat condition. Code 41: The temperature sensor sensed a low temperature condition. Code 42: Temperature sensor not providing an output.
106Description: Motor Failure One of the primary drive motors has failed.
80Description: Disk Failure An error was detected in the Hard Disk.
159Description: Misfeed at Tray 5: Jam T5 Paper being fed from the 1100-Sheet Feeder did not reach the Registration Sensor on time.
196Description: Replace Imaging Unit or Imaging Unit Is Near End of Life The Imaging Unit Life counter indicates the Imaging Unit is near or has reached its end of life.
40 ... 43Description: Fuser Failure The Fuser temperature regulation has failed. Code 40: The temperature sensor sensed an overheat condition. Code 41: The temperature sensor sensed a low temperature condition. Code 42: Temperature sensor not providing an output.
106Description: Motor Failure One of the primary drive motors has failed.
80Description: Disk Failure An error was detected in the Hard Disk.
159Description: Misfeed at Tray 5: Jam T5 Paper being fed from the 1100-Sheet Feeder did not reach the Registration Sensor on time.