Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox Phaser 6130 Top Searches

These results are ranked by popularity.

Error
016-718Description: Out of Memory The printer memory is full and cannot continue to print. Print job requires additional memory.
024-371Description: MCU Communication Error The MCU Board detected a communication error.
116-316, 116-320Description: RAM Error • 116-316: RAM Error (DIMM Slot RAM W/R Check Fail) • 116-320: RAM Error (DIMM Slot RAM Error)
-06Description: Load Manual Feed Size mismatch detected at Manual Feed Slot.
116-352Description: Network/FontROM/MACaddress/RAM/Controller/NVRAM/ASIC Error Failure occurred on the Image Processor Board. (Onboard Internal Loopback error)

Xerox Phaser 6130 Common Errors

The most common error codes.

Error
016-718Description: Out of Memory The printer memory is full and cannot continue to print. Print job requires additional memory.
024-371Description: MCU Communication Error The MCU Board detected a communication error.
116-316, 116-320Description: RAM Error • 116-316: RAM Error (DIMM Slot RAM W/R Check Fail) • 116-320: RAM Error (DIMM Slot RAM Error)
-06Description: Load Manual Feed Size mismatch detected at Manual Feed Slot.
116-352Description: Network/FontROM/MACaddress/RAM/Controller/NVRAM/ASIC Error Failure occurred on the Image Processor Board. (Onboard Internal Loopback error)
016-718Description: Out of Memory The printer memory is full and cannot continue to print. Print job requires additional memory.
024-371Description: MCU Communication Error The MCU Board detected a communication error.
116-316, 116-320Description: RAM Error • 116-316: RAM Error (DIMM Slot RAM W/R Check Fail) • 116-320: RAM Error (DIMM Slot RAM Error)
-06Description: Load Manual Feed Size mismatch detected at Manual Feed Slot.
116-352Description: Network/FontROM/MACaddress/RAM/Controller/NVRAM/ASIC Error Failure occurred on the Image Processor Board. (Onboard Internal Loopback error)