Xerox WorkCentre 4250 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Xerox WorkCentre 4250 Top Searches

These results are ranked by popularity.

Error
12-100Description: Finisher Jam 3 RAP 12-100 The finisher entrance sensor failed to actuate within the correct time after the document was fed from the exit sensor.
05-930Description: DADF Exit Door Open RAP 05-930 The machine has detected that the DADF exit door is open.
03-650Description: Ambient Temperature Sensor Fault RAP 03-650 The machine has detected a fault with the ambient temperature sensor.
08-200, 08-300, 08-400Description: Jam in Tray RAP 08-200 The machine has detected a paper jam in the tray 2 feed area. 08-300 The machine has detected a paper jam in the tray 3 feed area. 08-400 The machine has detected a paper jam in the tray 4 feed area.
09-300Description: Drum Warning RAP 09-300 The xerographic module is near the end of the design life. The design life is 55,000 print pages.

Xerox WorkCentre 4250 Common Errors

The most common error codes.

Error
12-100Description: Finisher Jam 3 RAP 12-100 The finisher entrance sensor failed to actuate within the correct time after the document was fed from the exit sensor.
05-930Description: DADF Exit Door Open RAP 05-930 The machine has detected that the DADF exit door is open.
03-650Description: Ambient Temperature Sensor Fault RAP 03-650 The machine has detected a fault with the ambient temperature sensor.
08-200, 08-300, 08-400Description: Jam in Tray RAP 08-200 The machine has detected a paper jam in the tray 2 feed area. 08-300 The machine has detected a paper jam in the tray 3 feed area. 08-400 The machine has detected a paper jam in the tray 4 feed area.
09-300Description: Drum Warning RAP 09-300 The xerographic module is near the end of the design life. The design life is 55,000 print pages.
12-100Description: Finisher Jam 3 RAP 12-100 The finisher entrance sensor failed to actuate within the correct time after the document was fed from the exit sensor.
05-930Description: DADF Exit Door Open RAP 05-930 The machine has detected that the DADF exit door is open.
03-650Description: Ambient Temperature Sensor Fault RAP 03-650 The machine has detected a fault with the ambient temperature sensor.
08-200, 08-300, 08-400Description: Jam in Tray RAP 08-200 The machine has detected a paper jam in the tray 2 feed area. 08-300 The machine has detected a paper jam in the tray 3 feed area. 08-400 The machine has detected a paper jam in the tray 4 feed area.
09-300Description: Drum Warning RAP 09-300 The xerographic module is near the end of the design life. The design life is 55,000 print pages.