Error |
---|
These results are ranked by popularity.
Error | |
---|---|
05-400 | Description: DADF Jam 4 RAP 05-400 The lead edge or trail edge of the document failed to actuate or deactuate the scan sensor within the correct time in reverse mode. |
09-900 | Description: Invalid Drum Cartridge RAP 09-900 The machine has detected an incompatible xerographic module |
12-730 | Description: Support Finger Fault RAP 12-730 The machine has detected a fault with the support fingers. |
03-100 | Description: Interface Error RAP 03-100 The machine to finisher communications have failed. |
07-231, 07-331, 07-431 | Description: Check the Tray Feed Area RAP 07-231 The machine has detected that paper is jammed in the tray 2 paper feeding area or the tray 2 side cover is open at power on. 07-331 The machine has detected that paper is jammed in the tray 3 paper feeding |
The most common error codes.
Error | |
---|---|
05-400 | Description: DADF Jam 4 RAP 05-400 The lead edge or trail edge of the document failed to actuate or deactuate the scan sensor within the correct time in reverse mode. |
09-900 | Description: Invalid Drum Cartridge RAP 09-900 The machine has detected an incompatible xerographic module |
12-730 | Description: Support Finger Fault RAP 12-730 The machine has detected a fault with the support fingers. |
03-100 | Description: Interface Error RAP 03-100 The machine to finisher communications have failed. |
07-231, 07-331, 07-431 | Description: Check the Tray Feed Area RAP 07-231 The machine has detected that paper is jammed in the tray 2 paper feeding area or the tray 2 side cover is open at power on. 07-331 The machine has detected that paper is jammed in the tray 3 paper feeding |
05-400 | Description: DADF Jam 4 RAP 05-400 The lead edge or trail edge of the document failed to actuate or deactuate the scan sensor within the correct time in reverse mode. |
09-900 | Description: Invalid Drum Cartridge RAP 09-900 The machine has detected an incompatible xerographic module |
12-730 | Description: Support Finger Fault RAP 12-730 The machine has detected a fault with the support fingers. |
03-100 | Description: Interface Error RAP 03-100 The machine to finisher communications have failed. |
07-231, 07-331, 07-431 | Description: Check the Tray Feed Area RAP 07-231 The machine has detected that paper is jammed in the tray 2 paper feeding area or the tray 2 side cover is open at power on. 07-331 The machine has detected that paper is jammed in the tray 3 paper feeding |