Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 5530c Top Searches

These results are ranked by popularity.

Error
CB81Description: Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. [MJ-1103/1104]
C392Description: Auto-toner sensor-C connection error
CE20Description: Image quality sensor abnormality (no pattern level): The output value of this sensor is out of a specified range when the image quality control test pattern is not formed.
EF14Description: Saddle paper exit jam
E9F0Description: Punching jam: Punching is not performed properly. [MJ-1103/1104 (when MJ-6102 is installed)]

Toshiba e-Studio 5530c Common Errors

The most common error codes.

Error
CB81Description: Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. [MJ-1103/1104]
C392Description: Auto-toner sensor-C connection error
CE20Description: Image quality sensor abnormality (no pattern level): The output value of this sensor is out of a specified range when the image quality control test pattern is not formed.
EF14Description: Saddle paper exit jam
E9F0Description: Punching jam: Punching is not performed properly. [MJ-1103/1104 (when MJ-6102 is installed)]
E511Description: ADU misfeeding (Paper not reaching the ADU transport sensor-1)
CB81Description: Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON. [MJ-1103/1104]
C392Description: Auto-toner sensor-C connection error
CE20Description: Image quality sensor abnormality (no pattern level): The output value of this sensor is out of a specified range when the image quality control test pattern is not formed.
E190Description: LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor.