Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 2830c Top Searches

These results are ranked by popularity.

Error
CB11Description: Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally.
C411Description: Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.
E220Description: 2nd drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor.
CD70Description: Waste toner box mixing paddle locked: The mixing paddle in the waste toner box does not rotate.
EF11Description: Saddle Stitch Finisher stapling error (front): Front stapling is not correctly done. [MJ-1106]

Toshiba e-Studio 2830c Common Errors

The most common error codes.

Error
CB11Description: Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally.
C411Description: Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.
E220Description: 2nd drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor.
CD70Description: Waste toner box mixing paddle locked: The mixing paddle in the waste toner box does not rotate.
EF11Description: Saddle Stitch Finisher stapling error (front): Front stapling is not correctly done. [MJ-1106]
EF11Description: Saddle Stitch Finisher stapling error (front): Front stapling is not correctly done. [MJ-1106]
CD70Description: Waste toner box mixing paddle locked: The mixing paddle in the waste toner box does not rotate.
E220Description: 2nd drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor.
C411Description: Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.
E930Description: Jam at the bridge unit transport sensor 2: The trailing edge of the paper does not reach the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 1.