Toshiba e-Studio 281c Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 281c Top Searches

These results are ranked by popularity.

Error
CEC0Description: 2nd transfer roller position detection abnormality: The 2nd transfer roller does not contact/release normally.
F070Description: Communication error between System-CPU and Engine-CPU
CB40Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
E420Description: PFP side cover open jam: The PFP side cover has opened during printing.
E712Description: Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor

Toshiba e-Studio 281c Common Errors

The most common error codes.

Error
CEC0Description: 2nd transfer roller position detection abnormality: The 2nd transfer roller does not contact/release normally.
F070Description: Communication error between System-CPU and Engine-CPU
CB40Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
E420Description: PFP side cover open jam: The PFP side cover has opened during printing.
E712Description: Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor
CEC0Description: 2nd transfer roller position detection abnormality: The 2nd transfer roller does not contact/release normally.
F070Description: Communication error between System-CPU and Engine-CPU
CB40Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1023/1024]
E420Description: PFP side cover open jam: The PFP side cover has opened during printing.
E712Description: Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor