Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Toshiba e-Studio 2550c Top Searches

These results are ranked by popularity.

Error
C411Description: Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.
F124Description: Database abnormality: Database is not operating normally. (Language management database)
EF11Description: Saddle Stitch Finisher stapling error (front): Front stapling is not correctly done. [MJ-1106]
E930Description: Jam at the bridge unit transport sensor 2: The trailing edge of the paper does not reach the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 1.
CB11Description: Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally.

Toshiba e-Studio 2550c Common Errors

The most common error codes.

Error
C411Description: Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.
F124Description: Database abnormality: Database is not operating normally. (Language management database)
EF11Description: Saddle Stitch Finisher stapling error (front): Front stapling is not correctly done. [MJ-1106]
E930Description: Jam at the bridge unit transport sensor 2: The trailing edge of the paper does not reach the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 1.
CB11Description: Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally.
CB11Description: Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally.
C411Description: Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.
E930Description: Jam at the bridge unit transport sensor 2: The trailing edge of the paper does not reach the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 1.
F124Description: Database abnormality: Database is not operating normally. (Language management database)
CD70Description: Waste toner box mixing paddle locked: The mixing paddle in the waste toner box does not rotate.