Sharp MXM950 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp MXM950 Top Searches

These results are ranked by popularity.

Error
E7-28Description: LSU control ASIC connection abnormality. Access error between the CPU on the PCU PWB and the LSU control ASIC
L4-50Description: Process cooling fan 1 trouble. The lock signal is detected during operation of the process cooling fan
U6-28Description: LCT1 paper feed position abnormality. When the lift-up operation is started, the upper limit sensor is turned OFF before the pick-up SOL is turned ON. (Normally the upper limit sensor is turned OFF only after turning ON the pick-up SOL.)
F1-22Description: Proof paper exit motor trouble. Finisher proof paper exit section transport motor abnormality
F1-87Description: Shift jogger motor trouble. Finisher shift tray section jogger drive motor abnormality

Sharp MXM950 Common Errors

The most common error codes.

Error
E7-28Description: LSU control ASIC connection abnormality. Access error between the CPU on the PCU PWB and the LSU control ASIC
L4-50Description: Process cooling fan 1 trouble. The lock signal is detected during operation of the process cooling fan
U6-28Description: LCT1 paper feed position abnormality. When the lift-up operation is started, the upper limit sensor is turned OFF before the pick-up SOL is turned ON. (Normally the upper limit sensor is turned OFF only after turning ON the pick-up SOL.)
F1-22Description: Proof paper exit motor trouble. Finisher proof paper exit section transport motor abnormality
F1-87Description: Shift jogger motor trouble. Finisher shift tray section jogger drive motor abnormality
E7-28Description: LSU control ASIC connection abnormality. Access error between the CPU on the PCU PWB and the LSU control ASIC
U6-28Description: LCT1 paper feed position abnormality. When the lift-up operation is started, the upper limit sensor is turned OFF before the pick-up SOL is turned ON. (Normally the upper limit sensor is turned OFF only after turning ON the pick-up SOL.)
F1-87Description: Shift jogger motor trouble. Finisher shift tray section jogger drive motor abnormality
H3-01Description: Sub thermistor high temperature trouble (RTH2). The fusing temperature in the PWB exceeds the specified level
L4-50Description: Process cooling fan 1 trouble. The lock signal is detected during operation of the process cooling fan