These results are ranked by popularity.
| Error | |
|---|---|
| F2-25 | Description: Discharge lamp trouble (Y) The lamp is kept open for 1 sec from turning on the discharge lamp. |
| F1-03 | Description: Finisher paper exit roller lifting operation trouble |
| U2-81 | Description: SCU PWB EEPROM check sum error |
| E7-26 | Description: LSU LD driver error (M) |
| L4-06 | Description: Transfer unit lift trouble A change in the primary transfer position sensor cannot be detected within the specified time in lifting operation of the primary transfer unit. |
The most common error codes.
| Error | |
|---|---|
| F2-25 | Description: Discharge lamp trouble (Y) The lamp is kept open for 1 sec from turning on the discharge lamp. |
| F1-03 | Description: Finisher paper exit roller lifting operation trouble |
| U2-81 | Description: SCU PWB EEPROM check sum error |
| E7-26 | Description: LSU LD driver error (M) |
| L4-06 | Description: Transfer unit lift trouble A change in the primary transfer position sensor cannot be detected within the specified time in lifting operation of the primary transfer unit. |
| F2-25 | Description: Discharge lamp trouble (Y) The lamp is kept open for 1 sec from turning on the discharge lamp. |
| F1-03 | Description: Finisher paper exit roller lifting operation trouble |
| U2-81 | Description: SCU PWB EEPROM check sum error |
| E7-26 | Description: LSU LD driver error (M) |
| L4-06 | Description: Transfer unit lift trouble A change in the primary transfer position sensor cannot be detected within the specified time in lifting operation of the primary transfer unit. |
