These results are ranked by popularity.
Error | |
---|---|
U6-09 | Description: LCC lift motor trouble • The encoder input value is not changed in 0.13sec (1st time)/0.5sec (2nd time and later) after rotation of the motor. • The motor is rotated for 18sec or more. • The encoder is changed after passing a certain time fr |
L8-20 | Description: Power controller communication trouble Communication establishment error/Framing/Parity/ Protocol error |
F2-71 | Description: Toner cartridge improper cartridge detection (CYAN) Improper data are detected in the CRUM contents when the normal CRUM of the cartridge is detected. |
F1-21 | Description: Finisher fan motor abnormality (MXFNX1), Finisher interface fan motor abnormality (MX-FNX2) Cooling fan motor trouble (MX-FNX1) Interface transport fan motor trouble (MX-FNX2) |
E7-00 | Description: System memory access error System memory trouble (Tandem memory cannot be guaranteed.) Access to system memory cannot be made. |
The most common error codes.
Error | |
---|---|
U6-09 | Description: LCC lift motor trouble • The encoder input value is not changed in 0.13sec (1st time)/0.5sec (2nd time and later) after rotation of the motor. • The motor is rotated for 18sec or more. • The encoder is changed after passing a certain time fr |
L8-20 | Description: Power controller communication trouble Communication establishment error/Framing/Parity/ Protocol error |
F2-71 | Description: Toner cartridge improper cartridge detection (CYAN) Improper data are detected in the CRUM contents when the normal CRUM of the cartridge is detected. |
F1-21 | Description: Finisher fan motor abnormality (MXFNX1), Finisher interface fan motor abnormality (MX-FNX2) Cooling fan motor trouble (MX-FNX1) Interface transport fan motor trouble (MX-FNX2) |
E7-00 | Description: System memory access error System memory trouble (Tandem memory cannot be guaranteed.) Access to system memory cannot be made. |
U6-09 | Description: LCC lift motor trouble • The encoder input value is not changed in 0.13sec (1st time)/0.5sec (2nd time and later) after rotation of the motor. • The motor is rotated for 18sec or more. • The encoder is changed after passing a certain time fr |
L8-20 | Description: Power controller communication trouble Communication establishment error/Framing/Parity/ Protocol error |
F2-71 | Description: Toner cartridge improper cartridge detection (CYAN) Improper data are detected in the CRUM contents when the normal CRUM of the cartridge is detected. |
F1-21 | Description: Finisher fan motor abnormality (MXFNX1), Finisher interface fan motor abnormality (MX-FNX2) Cooling fan motor trouble (MX-FNX1) Interface transport fan motor trouble (MX-FNX2) |
E7-00 | Description: System memory access error System memory trouble (Tandem memory cannot be guaranteed.) Access to system memory cannot be made. |