Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp ARM258 Top Searches

These results are ranked by popularity.

Error
E7-11Description: Shading trouble (white correction) Improper CCD white reference plate reading level for copy lamp lighting
F6-82Description: FAX control PWB communication trouble (Over-run) Communication trouble between MCU and FAX control PWB (Overrun error)
H3-11Description: Sub heater lamp abnormally high temperature soft detection trouble A/D value the fusing sub heater lamp thermistor causes abnormally high temperature (over 230°C).
F1-15Description: Finisher lift-up motor trouble The finisher lift-up motor does not reach the specified position.
F9-88Description: Printer PWB communication trouble (Timeout) Communication trouble between MCU and printer PWB (Timeout error)

Sharp ARM258 Common Errors

The most common error codes.

Error
E7-11Description: Shading trouble (white correction) Improper CCD white reference plate reading level for copy lamp lighting
F6-82Description: FAX control PWB communication trouble (Over-run) Communication trouble between MCU and FAX control PWB (Overrun error)
H3-11Description: Sub heater lamp abnormally high temperature soft detection trouble A/D value the fusing sub heater lamp thermistor causes abnormally high temperature (over 230°C).
F1-15Description: Finisher lift-up motor trouble The finisher lift-up motor does not reach the specified position.
F9-88Description: Printer PWB communication trouble (Timeout) Communication trouble between MCU and printer PWB (Timeout error)
E7-11Description: Shading trouble (white correction) Improper CCD white reference plate reading level for copy lamp lighting
F6-82Description: FAX control PWB communication trouble (Over-run) Communication trouble between MCU and FAX control PWB (Overrun error)
H3-11Description: Sub heater lamp abnormally high temperature soft detection trouble A/D value the fusing sub heater lamp thermistor causes abnormally high temperature (over 230°C).
F1-15Description: Finisher lift-up motor trouble The finisher lift-up motor does not reach the specified position.
F9-88Description: Printer PWB communication trouble (Timeout) Communication trouble between MCU and printer PWB (Timeout error)