These results are ranked by popularity.
| Error | |
|---|---|
| E7-01 | Description: Duplex model memory error The memory capacity for the duplex model machine is improper. Insufficient memory capacity |
| L1-00 | Description: Scanner feed trouble The scanner does not complete feeding in the specified time. |
| CH Blink | Description: Developing cartridge not installed The developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L3-00 | Description: Scanner return trouble The scanner does not complete returning in the specified time. The mirror is not in the home position when OC copying is started with the mirror standby in the home position. |
The most common error codes.
| Error | |
|---|---|
| E7-01 | Description: Duplex model memory error The memory capacity for the duplex model machine is improper. Insufficient memory capacity |
| L1-00 | Description: Scanner feed trouble The scanner does not complete feeding in the specified time. |
| CH Blink | Description: Developing cartridge not installed The developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L3-00 | Description: Scanner return trouble The scanner does not complete returning in the specified time. The mirror is not in the home position when OC copying is started with the mirror standby in the home position. |
| E7-01 | Description: Duplex model memory error The memory capacity for the duplex model machine is improper. Insufficient memory capacity |
| L1-00 | Description: Scanner feed trouble The scanner does not complete feeding in the specified time. |
| CH Blink | Description: Developing cartridge not installed The developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM. |
| E7-02 | Description: LSU trouble The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON) |
| L3-00 | Description: Scanner return trouble The scanner does not complete returning in the specified time. The mirror is not in the home position when OC copying is started with the mirror standby in the home position. |
