Sharp AR5132 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Sharp AR5132 Top Searches

These results are ranked by popularity.

Error
L6 10Description: Polygon motor lock detected. It was judged that there is no output of polygon motor lock signal of LSU. The lock signal was checked at about 10-second intervals after the polygon motor started rotating. As result, it was judged that the poly
U5 01Description: RADF resist sensor detection trouble
F1 00Description: Sorter communication trouble. Communication line test error occurs when power is turned on or after the exit of a simulation mode. Improper communication with sorter
F3 22Description: Lower cassette lift-up trouble. LPED does not turn on within the specified time. LLUD does not turn on within the specified time.
U2 00Description: EEPROM version error. Error in writing into EEPROM.

Sharp AR5132 Common Errors

The most common error codes.

Error
L6 10Description: Polygon motor lock detected. It was judged that there is no output of polygon motor lock signal of LSU. The lock signal was checked at about 10-second intervals after the polygon motor started rotating. As result, it was judged that the poly
U5 01Description: RADF resist sensor detection trouble
F1 00Description: Sorter communication trouble. Communication line test error occurs when power is turned on or after the exit of a simulation mode. Improper communication with sorter
F3 22Description: Lower cassette lift-up trouble. LPED does not turn on within the specified time. LLUD does not turn on within the specified time.
U2 00Description: EEPROM version error. Error in writing into EEPROM.
L6 10Description: Polygon motor lock detected. It was judged that there is no output of polygon motor lock signal of LSU. The lock signal was checked at about 10-second intervals after the polygon motor started rotating. As result, it was judged that the poly
U5 01Description: RADF resist sensor detection trouble
F1 00Description: Sorter communication trouble. Communication line test error occurs when power is turned on or after the exit of a simulation mode. Improper communication with sorter
F3 22Description: Lower cassette lift-up trouble. LPED does not turn on within the specified time. LLUD does not turn on within the specified time.
U2 00Description: EEPROM version error. Error in writing into EEPROM.