These results are ranked by popularity.
Error | |
---|---|
H4 00 | Description: Heat roller abnormally low temperature. The setup temperature (about 90°C is not reached within the specified time (about 35sec) from turning on the power ON SW. (When the temperature falls below 120°C in the standby mode.) |
E7 10 | Description: Shading trouble (black correction). CCD black reference plate scan level abnormality when the copy lamp turns off. |
F2 02 | Description: Toner supply failure. The value judged from the actual toner supply hysteresis differs greatly from the toner sensor value. |
CE 00 | Description: The other communication error has occurred. |
U2 11 | Description: Counter check sum value stored in the EEPROM is abnormal. |
The most common error codes.
Error | |
---|---|
H4 00 | Description: Heat roller abnormally low temperature. The setup temperature (about 90°C is not reached within the specified time (about 35sec) from turning on the power ON SW. (When the temperature falls below 120°C in the standby mode.) |
E7 10 | Description: Shading trouble (black correction). CCD black reference plate scan level abnormality when the copy lamp turns off. |
F2 02 | Description: Toner supply failure. The value judged from the actual toner supply hysteresis differs greatly from the toner sensor value. |
CE 00 | Description: The other communication error has occurred. |
U2 11 | Description: Counter check sum value stored in the EEPROM is abnormal. |
H4 00 | Description: Heat roller abnormally low temperature. The setup temperature (about 90°C is not reached within the specified time (about 35sec) from turning on the power ON SW. (When the temperature falls below 120°C in the standby mode.) |
E7 10 | Description: Shading trouble (black correction). CCD black reference plate scan level abnormality when the copy lamp turns off. |
F2 02 | Description: Toner supply failure. The value judged from the actual toner supply hysteresis differs greatly from the toner sensor value. |
CE 00 | Description: The other communication error has occurred. |
U2 11 | Description: Counter check sum value stored in the EEPROM is abnormal. |