These results are ranked by popularity.
| Error | |
|---|---|
| L4 01 | Description: Main motor lock detection. When the main motor encoder pulse is not detected for 100 msec. |
| E7 11 | Description: Shading trouble (White correction). The CCD white scan level is abnormal when the shading. |
| L6 10 | Description: Polygon motor lock detection. The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation. |
| E7 16 | Description: Abnormal laser output. When the laser output is stopped, HSYNC is detected. |
| U1 03 | Description: The SRAM backup battery voltage on FAX PWB falls. |
The most common error codes.
| Error | |
|---|---|
| L4 01 | Description: Main motor lock detection. When the main motor encoder pulse is not detected for 100 msec. |
| E7 11 | Description: Shading trouble (White correction). The CCD white scan level is abnormal when the shading. |
| L6 10 | Description: Polygon motor lock detection. The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation. |
| E7 16 | Description: Abnormal laser output. When the laser output is stopped, HSYNC is detected. |
| U1 03 | Description: The SRAM backup battery voltage on FAX PWB falls. |
| L4 01 | Description: Main motor lock detection. When the main motor encoder pulse is not detected for 100 msec. |
| E7 11 | Description: Shading trouble (White correction). The CCD white scan level is abnormal when the shading. |
| L6 10 | Description: Polygon motor lock detection. The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation. |
| E7 16 | Description: Abnormal laser output. When the laser output is stopped, HSYNC is detected. |
| U1 03 | Description: The SRAM backup battery voltage on FAX PWB falls. |
