These results are ranked by popularity.
| Error | |
|---|---|
| H2-00 | Description: Thermistor open detection |
| H3-00 | Description: Heat roller abnormally high temperature |
| H4-00 | Description: Heat roller abnormally low temperature |
| L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
The most common error codes.
| Error | |
|---|---|
| H2-00 | Description: Thermistor open detection |
| H3-00 | Description: Heat roller abnormally high temperature |
| H4-00 | Description: Heat roller abnormally low temperature |
| L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
| H2-00 | Description: Thermistor open detection |
| H3-00 | Description: Heat roller abnormally high temperature |
| H4-00 | Description: Heat roller abnormally low temperature |
| L1-00 | Description: Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked) |
| E7-01 | Description: Duplex model memory setup error, memory not-detected error |
