These results are ranked by popularity.
Error | |
---|---|
32 | Description: JAM 1 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed. |
11 | Description: Ghost (3) Ghost occurs at 66.3 or 75.5 mm intervals. |
22 | Description: Defective FAX RECEIVE (2) Received data are lengthened or cut in the printing. |
01 | Description: 1. Straight thin black vertical lines occur in the printing. 2. Dark black vertical bands occur in the printing. |
37 | Description: Fuser Error A message "Open Heat Error/Over heat/Heating Error' is displayed in the LCD panel. |
The most common error codes.
Error | |
---|---|
32 | Description: JAM 1 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed. |
11 | Description: Ghost (3) Ghost occurs at 66.3 or 75.5 mm intervals. |
22 | Description: Defective FAX RECEIVE (2) Received data are lengthened or cut in the printing. |
01 | Description: 1. Straight thin black vertical lines occur in the printing. 2. Dark black vertical bands occur in the printing. |
37 | Description: Fuser Error A message "Open Heat Error/Over heat/Heating Error' is displayed in the LCD panel. |
32 | Description: JAM 1 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed. |
11 | Description: Ghost (3) Ghost occurs at 66.3 or 75.5 mm intervals. |
22 | Description: Defective FAX RECEIVE (2) Received data are lengthened or cut in the printing. |
01 | Description: 1. Straight thin black vertical lines occur in the printing. 2. Dark black vertical bands occur in the printing. |
37 | Description: Fuser Error A message "Open Heat Error/Over heat/Heating Error' is displayed in the LCD panel. |