Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SPC831DN Top Searches

These results are ranked by popularity.

Error
637Description: Tracking information notice error (Tracking application error)
549Description: Fusing heater connection error The fusing sleeve belt rotation sensor detects the target temperature as 50°C for 5 seconds or more after the fusing/paper exit motor has turned on.
441Description: Image transfer unit motor error When the motor is ON, the machine monitors the lock signals every 100 ms. If the High status occurs 20 times consecutively, the machine judges that the motor is not rotating correctly.
881-01Description: Authentication area error This detects a problem with the software.
240-04Description: LD error: Y The LD driver's error signal is detected after LD initialization. An error is detected while initializing P-MAC, which detects Ith/ of the LD.

Ricoh SPC831DN Common Errors

The most common error codes.

Error
637Description: Tracking information notice error (Tracking application error)
549Description: Fusing heater connection error The fusing sleeve belt rotation sensor detects the target temperature as 50°C for 5 seconds or more after the fusing/paper exit motor has turned on.
441Description: Image transfer unit motor error When the motor is ON, the machine monitors the lock signals every 100 ms. If the High status occurs 20 times consecutively, the machine judges that the motor is not rotating correctly.
881-01Description: Authentication area error This detects a problem with the software.
240-04Description: LD error: Y The LD driver's error signal is detected after LD initialization. An error is detected while initializing P-MAC, which detects Ith/ of the LD.
637Description: Tracking information notice error (Tracking application error)
549Description: Fusing heater connection error The fusing sleeve belt rotation sensor detects the target temperature as 50°C for 5 seconds or more after the fusing/paper exit motor has turned on.
441Description: Image transfer unit motor error When the motor is ON, the machine monitors the lock signals every 100 ms. If the High status occurs 20 times consecutively, the machine judges that the motor is not rotating correctly.
881-01Description: Authentication area error This detects a problem with the software.
240-04Description: LD error: Y The LD driver's error signal is detected after LD initialization. An error is detected while initializing P-MAC, which detects Ith/ of the LD.