Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SPC730DN Top Searches

These results are ranked by popularity.

Error
364-04Description: Toner End Sensor output count error Y The output count from the Toner End Sensor indicates an average of 0.
855Description: Wireless LAN card error
552-02Description: Fusing (End) thermistor not reloaded 1 The heating (End) thermistor does not reach 80 deg C 7.7 seconds after the start of heat control (during normal startup control)
460-00Description: Separation: Output error The "HVP_ERR_D output error Sensor signal" is monitored at 20 ms intervals. If 0 (error) is detected ten times in succession (200 ms), the following causes are suspected:
872-00Description: HDD mail received data error An error is detected in the HDD at machine power-on

Ricoh SPC730DN Common Errors

The most common error codes.

Error
364-04Description: Toner End Sensor output count error Y The output count from the Toner End Sensor indicates an average of 0.
855Description: Wireless LAN card error
552-02Description: Fusing (End) thermistor not reloaded 1 The heating (End) thermistor does not reach 80 deg C 7.7 seconds after the start of heat control (during normal startup control)
460-00Description: Separation: Output error The "HVP_ERR_D output error Sensor signal" is monitored at 20 ms intervals. If 0 (error) is detected ten times in succession (200 ms), the following causes are suspected:
872-00Description: HDD mail received data error An error is detected in the HDD at machine power-on
364-04Description: Toner End Sensor output count error Y The output count from the Toner End Sensor indicates an average of 0.
855Description: Wireless LAN card error
552-02Description: Fusing (End) thermistor not reloaded 1 The heating (End) thermistor does not reach 80 deg C 7.7 seconds after the start of heat control (during normal startup control)
460-00Description: Separation: Output error The "HVP_ERR_D output error Sensor signal" is monitored at 20 ms intervals. If 0 (error) is detected ten times in succession (200 ms), the following causes are suspected:
872-00Description: HDD mail received data error An error is detected in the HDD at machine power-on