Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SPC342DN Top Searches

These results are ranked by popularity.

Error
SC860-00Description: HDD Startup Error At Main Power On (HDD Error) • The HDD is connected but the driver detected the following errors: • SS_NO.T_READY:/* (-2)HDD does not become READY*/ • SS_BAD_LABEL:/* (-4)Wrong partition type*/ • SS_READ_ERROR:/* (-5)Error
SC445Description: ITB (Image Transfer Belt) Unit: Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Error The
SC874Description: Delete All Error • An error occurred when deleting data in the HDD or NVRAM. • Erasing All Memory (deleting all data in the HDD/NVRAM) was executed but the Erase All Memory option was not installed.
SC900-00Description: Electronic Counter Error The electronic total counter value is not the specified value. This error is detected when the counter moves forward.
SC641-00 ... SC641-04Description: Engine to Controller Communication Error (No Response) The controller sent a data frame by RAPI protocol, but there was no response after trying 3 times, once every 100ms.

Ricoh SPC342DN Common Errors

The most common error codes.

Error
SC860-00Description: HDD Startup Error At Main Power On (HDD Error) • The HDD is connected but the driver detected the following errors: • SS_NO.T_READY:/* (-2)HDD does not become READY*/ • SS_BAD_LABEL:/* (-4)Wrong partition type*/ • SS_READ_ERROR:/* (-5)Error
SC445Description: ITB (Image Transfer Belt) Unit: Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Error The
SC874Description: Delete All Error • An error occurred when deleting data in the HDD or NVRAM. • Erasing All Memory (deleting all data in the HDD/NVRAM) was executed but the Erase All Memory option was not installed.
SC900-00Description: Electronic Counter Error The electronic total counter value is not the specified value. This error is detected when the counter moves forward.
SC641-00 ... SC641-04Description: Engine to Controller Communication Error (No Response) The controller sent a data frame by RAPI protocol, but there was no response after trying 3 times, once every 100ms.
SC860-00Description: HDD Startup Error At Main Power On (HDD Error) • The HDD is connected but the driver detected the following errors: • SS_NO.T_READY:/* (-2)HDD does not become READY*/ • SS_BAD_LABEL:/* (-4)Wrong partition type*/ • SS_READ_ERROR:/* (-5)Error
SC445Description: ITB (Image Transfer Belt) Unit: Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Error The
SC874Description: Delete All Error • An error occurred when deleting data in the HDD or NVRAM. • Erasing All Memory (deleting all data in the HDD/NVRAM) was executed but the Erase All Memory option was not installed.
SC900-00Description: Electronic Counter Error The electronic total counter value is not the specified value. This error is detected when the counter moves forward.
SC641-00 ... SC641-04Description: Engine to Controller Communication Error (No Response) The controller sent a data frame by RAPI protocol, but there was no response after trying 3 times, once every 100ms.