Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SPC340DN Top Searches

These results are ranked by popularity.

Error
SC860-00Description: HDD Startup Error At Main Power On (HDD Error) • The HDD is connected but the driver detected the following errors: • SS_NO.T_READY:/* (-2)HDD does not become READY*/ • SS_BAD_LABEL:/* (-4)Wrong partition type*/ • SS_READ_ERROR:/* (-5)Error
SC445Description: ITB (Image Transfer Belt) Unit: Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Error The
SC547Description: Zero Cross Error The zero cross signal is not detected for three seconds even though the fusing lamp relay is on after turning on the main power or closing the front door.
SC900-00Description: Electronic Counter Error The electronic total counter value is not the specified value. This error is detected when the counter moves forward.
000Description: Cover Open

Ricoh SPC340DN Common Errors

The most common error codes.

Error
SC860-00Description: HDD Startup Error At Main Power On (HDD Error) • The HDD is connected but the driver detected the following errors: • SS_NO.T_READY:/* (-2)HDD does not become READY*/ • SS_BAD_LABEL:/* (-4)Wrong partition type*/ • SS_READ_ERROR:/* (-5)Error
SC445Description: ITB (Image Transfer Belt) Unit: Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Error The
SC547Description: Zero Cross Error The zero cross signal is not detected for three seconds even though the fusing lamp relay is on after turning on the main power or closing the front door.
SC900-00Description: Electronic Counter Error The electronic total counter value is not the specified value. This error is detected when the counter moves forward.
000Description: Cover Open
SC860-00Description: HDD Startup Error At Main Power On (HDD Error) • The HDD is connected but the driver detected the following errors: • SS_NO.T_READY:/* (-2)HDD does not become READY*/ • SS_BAD_LABEL:/* (-4)Wrong partition type*/ • SS_READ_ERROR:/* (-5)Error
SC445Description: ITB (Image Transfer Belt) Unit: Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Error The
SC547Description: Zero Cross Error The zero cross signal is not detected for three seconds even though the fusing lamp relay is on after turning on the main power or closing the front door.
SC900-00Description: Electronic Counter Error The electronic total counter value is not the specified value. This error is detected when the counter moves forward.
000Description: Cover Open