These results are ranked by popularity.
Error | |
---|---|
445 | Description: ITB (Image Transfer Belt) Unit Error Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Erro |
548 | Description: Low Temperature Error The center thermistor detects 100°C or less for 4 seconds. |
195 | Description: Serial Number Error The serial number stored in the memory (EGB) is not correct. |
480 | Description: Agitator Motor Error The agitator motor error is detected twice for 10 msec during the initialization at power-on or after the cover is closed. |
557 | Description: Zero Cross Frequency Error The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds. |
The most common error codes.
Error | |
---|---|
445 | Description: ITB (Image Transfer Belt) Unit Error Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Erro |
548 | Description: Low Temperature Error The center thermistor detects 100°C or less for 4 seconds. |
195 | Description: Serial Number Error The serial number stored in the memory (EGB) is not correct. |
480 | Description: Agitator Motor Error The agitator motor error is detected twice for 10 msec during the initialization at power-on or after the cover is closed. |
557 | Description: Zero Cross Frequency Error The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds. |
445 | Description: ITB (Image Transfer Belt) Unit Error Home Position Error The ITB contact sensor does not detect the home position of the ITB for 5 seconds after the ITB unit initialization has been done. ITB (Image Transfer Belt) Unit: Contact Position Erro |
548 | Description: Low Temperature Error The center thermistor detects 100°C or less for 4 seconds. |
195 | Description: Serial Number Error The serial number stored in the memory (EGB) is not correct. |
480 | Description: Agitator Motor Error The agitator motor error is detected twice for 10 msec during the initialization at power-on or after the cover is closed. |
557 | Description: Zero Cross Frequency Error The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds. |