Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP8100DN Top Searches

These results are ranked by popularity.

Error
725Description: Finisher stack feed-out motor error The stack feed-out belt HP sensor did not activate within 4550 pulses after the stack feed-out motor turned on. Staple mode cannot be used.
402Description: Transfer roller open error The transfer roller current feedback signal is not detected.
872Description: HDD mail receive data error The machine detected that the HDD was not operating correctly at power on. The machine detected that the HDD was not operating correctly (could neither read nor write) while processing incoming email
820Description: Self-Diagnostic Error: CPU The central processing unit returned an unexpected error during the self-diagnostic test.
504Description: 4th tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. Note: Normally, if the power switch is turned on when the paper is already at the feed heigh

Ricoh SP8100DN Common Errors

The most common error codes.

Error
725Description: Finisher stack feed-out motor error The stack feed-out belt HP sensor did not activate within 4550 pulses after the stack feed-out motor turned on. Staple mode cannot be used.
402Description: Transfer roller open error The transfer roller current feedback signal is not detected.
872Description: HDD mail receive data error The machine detected that the HDD was not operating correctly at power on. The machine detected that the HDD was not operating correctly (could neither read nor write) while processing incoming email
820Description: Self-Diagnostic Error: CPU The central processing unit returned an unexpected error during the self-diagnostic test.
504Description: 4th tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. Note: Normally, if the power switch is turned on when the paper is already at the feed heigh
402Description: Transfer roller open error The transfer roller current feedback signal is not detected.
725Description: Finisher stack feed-out motor error The stack feed-out belt HP sensor did not activate within 4550 pulses after the stack feed-out motor turned on. Staple mode cannot be used.
872Description: HDD mail receive data error The machine detected that the HDD was not operating correctly at power on. The machine detected that the HDD was not operating correctly (could neither read nor write) while processing incoming email
504Description: 4th tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. Note: Normally, if the power switch is turned on when the paper is already at the feed heigh
986Description: Software write parameter setting error An unstable area at the storage destination in the settings table is set NULL for the parameter received by the write module.