Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP6430DN Top Searches

These results are ranked by popularity.

Error
SC551-00Description: Thermistor broken (Edge) While a fusing heater works, temperatures of -20°C or less during a consecutive 9 seconds are detected more than 10 times.
SC823-00Description: Self-diagnostics error: NIC [XXXX]: Detailed error code
SC867-00Description: SD card removal detection When an application SD card is removed from the slot while the application is being activated.
SC877-00Description: Data Overwrite Security card error The "Auto Erase Memory" function of the Data Overwrite Security is enabled but it cannot be executed.
SC460-00Description: High voltage output error: Paper separation This SC is issued if the engine board detects a short 10 times consecutively during PWM signal output of the paper separation.

Ricoh SP6430DN Common Errors

The most common error codes.

Error
SC551-00Description: Thermistor broken (Edge) While a fusing heater works, temperatures of -20°C or less during a consecutive 9 seconds are detected more than 10 times.
SC823-00Description: Self-diagnostics error: NIC [XXXX]: Detailed error code
SC867-00Description: SD card removal detection When an application SD card is removed from the slot while the application is being activated.
SC877-00Description: Data Overwrite Security card error The "Auto Erase Memory" function of the Data Overwrite Security is enabled but it cannot be executed.
SC460-00Description: High voltage output error: Paper separation This SC is issued if the engine board detects a short 10 times consecutively during PWM signal output of the paper separation.
SC551-00Description: Thermistor broken (Edge) While a fusing heater works, temperatures of -20°C or less during a consecutive 9 seconds are detected more than 10 times.
SC823-00Description: Self-diagnostics error: NIC [XXXX]: Detailed error code
SC867-00Description: SD card removal detection When an application SD card is removed from the slot while the application is being activated.
SC460-00Description: High voltage output error: Paper separation This SC is issued if the engine board detects a short 10 times consecutively during PWM signal output of the paper separation.
SC650-04Description: Remote Service Modem Communication Error (dialup failing because of incorrect modem configuration) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC G