Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP5300DN Top Searches

These results are ranked by popularity.

Error
SC865-02 ... SC865-23Description: HDD access error During HDD operation, the HDD returned an error.
SC503-01Description: Paper Feed Tray Lift Motor Error (Tray 3) After the paper feed tray 3 is set, paper feed tray lift sensor does not turn on within 10 seconds. This SC is issued if a problem is detected four times consecutively.
SC687-00Description: PER Not Received Error RAPI-PER command was not received from the controller within the specified time (120 sec.) after RAPI-PES (preparation request for image transmission) is issued.
SC875-01Description: Delete all error (HDD erasure) (hddchack –i error) An error was detected before HDD/data erasure starts. (Failed to erase data/failed to logically format HDD)
SC853-00Description: Bluetooth device connection error (MP 501/601 Only) The Bluetooth hardware (USB type) was connected after the machine was turned on.

Ricoh SP5300DN Common Errors

The most common error codes.

Error
SC865-02 ... SC865-23Description: HDD access error During HDD operation, the HDD returned an error.
SC503-01Description: Paper Feed Tray Lift Motor Error (Tray 3) After the paper feed tray 3 is set, paper feed tray lift sensor does not turn on within 10 seconds. This SC is issued if a problem is detected four times consecutively.
SC687-00Description: PER Not Received Error RAPI-PER command was not received from the controller within the specified time (120 sec.) after RAPI-PES (preparation request for image transmission) is issued.
SC875-01Description: Delete all error (HDD erasure) (hddchack –i error) An error was detected before HDD/data erasure starts. (Failed to erase data/failed to logically format HDD)
SC853-00Description: Bluetooth device connection error (MP 501/601 Only) The Bluetooth hardware (USB type) was connected after the machine was turned on.
SC865-02 ... SC865-23Description: HDD access error During HDD operation, the HDD returned an error.
SC503-01Description: Paper Feed Tray Lift Motor Error (Tray 3) After the paper feed tray 3 is set, paper feed tray lift sensor does not turn on within 10 seconds. This SC is issued if a problem is detected four times consecutively.
SC687-00Description: PER Not Received Error RAPI-PER command was not received from the controller within the specified time (120 sec.) after RAPI-PES (preparation request for image transmission) is issued.
SC875-01Description: Delete all error (HDD erasure) (hddchack –i error) An error was detected before HDD/data erasure starts. (Failed to erase data/failed to logically format HDD)
SC853-00Description: Bluetooth device connection error (MP 501/601 Only) The Bluetooth hardware (USB type) was connected after the machine was turned on.