Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP5210SF Top Searches

These results are ranked by popularity.

Error
877Description: Data Overwrite Security SD card error The 'all delete' function did not execute but the Data Overwrite Security Unit (D362) is installed and activated.
721Description: Front fence motor error The jogger fence motor in the finisher is not operating.
440Description: Transfer roller leak error 1 A transfer roller current leak signal wad detected higher or lower than 50% for 200 ms. (The current feedback signal for the transfer roller was not detected within the correct time.)
998Description: Application start error No applications start within 60 sec. after the power is turned on.
820Description: Self-diagnostics error: CPU Cut-in in ASIC occurs.

Ricoh SP5210SF Common Errors

The most common error codes.

Error
877Description: Data Overwrite Security SD card error The 'all delete' function did not execute but the Data Overwrite Security Unit (D362) is installed and activated.
721Description: Front fence motor error The jogger fence motor in the finisher is not operating.
440Description: Transfer roller leak error 1 A transfer roller current leak signal wad detected higher or lower than 50% for 200 ms. (The current feedback signal for the transfer roller was not detected within the correct time.)
998Description: Application start error No applications start within 60 sec. after the power is turned on.
820Description: Self-diagnostics error: CPU Cut-in in ASIC occurs.
877Description: Data Overwrite Security SD card error The 'all delete' function did not execute but the Data Overwrite Security Unit (D362) is installed and activated.
721Description: Front fence motor error The jogger fence motor in the finisher is not operating.
440Description: Transfer roller leak error 1 A transfer roller current leak signal wad detected higher or lower than 50% for 200 ms. (The current feedback signal for the transfer roller was not detected within the correct time.)
998Description: Application start error No applications start within 60 sec. after the power is turned on.
820Description: Self-diagnostics error: CPU Cut-in in ASIC occurs.