Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP5200SF Top Searches

These results are ranked by popularity.

Error
440Description: Transfer roller leak error 1 A transfer roller current leak signal wad detected higher or lower than 50% for 200 ms. (The current feedback signal for the transfer roller was not detected within the correct time.)
721Description: Front fence motor error The jogger fence motor in the finisher is not operating.
877Description: Data Overwrite Security SD card error The 'all delete' function did not execute but the Data Overwrite Security Unit (D362) is installed and activated.
101Description: Exposure lamp error 1 The standard white level setting dropped below the specified range during scanning.
559Description: Consecutive fusing unit paper jams Three consecutive paper jams occurred in the fusing unit. The paper jam counter for the fusing unit reaches 3 times. The paper jam counter clears after the paper feeds correctly. Note: This SC is issued onl

Ricoh SP5200SF Common Errors

The most common error codes.

Error
440Description: Transfer roller leak error 1 A transfer roller current leak signal wad detected higher or lower than 50% for 200 ms. (The current feedback signal for the transfer roller was not detected within the correct time.)
721Description: Front fence motor error The jogger fence motor in the finisher is not operating.
877Description: Data Overwrite Security SD card error The 'all delete' function did not execute but the Data Overwrite Security Unit (D362) is installed and activated.
101Description: Exposure lamp error 1 The standard white level setting dropped below the specified range during scanning.
559Description: Consecutive fusing unit paper jams Three consecutive paper jams occurred in the fusing unit. The paper jam counter for the fusing unit reaches 3 times. The paper jam counter clears after the paper feeds correctly. Note: This SC is issued onl
440Description: Transfer roller leak error 1 A transfer roller current leak signal wad detected higher or lower than 50% for 200 ms. (The current feedback signal for the transfer roller was not detected within the correct time.)
721Description: Front fence motor error The jogger fence motor in the finisher is not operating.
877Description: Data Overwrite Security SD card error The 'all delete' function did not execute but the Data Overwrite Security Unit (D362) is installed and activated.
101Description: Exposure lamp error 1 The standard white level setting dropped below the specified range during scanning.
559Description: Consecutive fusing unit paper jams Three consecutive paper jams occurred in the fusing unit. The paper jam counter for the fusing unit reaches 3 times. The paper jam counter clears after the paper feeds correctly. Note: This SC is issued onl