Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP4210N Top Searches

These results are ranked by popularity.

Error
824Description: Self-diagnostic error 4: NVRAM NVRAM device does not exist, NVRAM device is damaged, NVRAM socket damaged
543Description: Fusing overheat error – software The fusing temperature was detected higher than 235C for longer than 200 ms.s
863Description: HDD data read failure The data written to the HDD cannot be read normally, due to bad sectors generated during operation.
670Description: Engine startup error The BCU failed to respond within the prescribed time when the machine is turn on.
876Description: Log data abnormal An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.

Ricoh SP4210N Common Errors

The most common error codes.

Error
824Description: Self-diagnostic error 4: NVRAM NVRAM device does not exist, NVRAM device is damaged, NVRAM socket damaged
543Description: Fusing overheat error – software The fusing temperature was detected higher than 235C for longer than 200 ms.s
863Description: HDD data read failure The data written to the HDD cannot be read normally, due to bad sectors generated during operation.
670Description: Engine startup error The BCU failed to respond within the prescribed time when the machine is turn on.
876Description: Log data abnormal An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
824Description: Self-diagnostic error 4: NVRAM NVRAM device does not exist, NVRAM device is damaged, NVRAM socket damaged
543Description: Fusing overheat error – software The fusing temperature was detected higher than 235C for longer than 200 ms.s
863Description: HDD data read failure The data written to the HDD cannot be read normally, due to bad sectors generated during operation.
670Description: Engine startup error The BCU failed to respond within the prescribed time when the machine is turn on.
876Description: Log data abnormal An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.