Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP4100N Top Searches

These results are ranked by popularity.

Error
920Description: Printer error 1 An internal application error was detected and operation cannot continue.
669Description: NVRAM Error The NVRAM was not connected at power on, or read/write operations on the NVRAM failed.
853Description: Wireless LAN Error 1 During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
302Description: Charge roller current leak The PWM duty output exceeded 60% for longer than 200 ms., indicating a leak in the charge roller current.
828Description: Self-diagnostic error 7: ROM Measuring the CRC for the boot monitor and operating system program results in an error. A check of the CRC value for ROMFS of the entire ROM area results in an error.

Ricoh SP4100N Common Errors

The most common error codes.

Error
920Description: Printer error 1 An internal application error was detected and operation cannot continue.
669Description: NVRAM Error The NVRAM was not connected at power on, or read/write operations on the NVRAM failed.
853Description: Wireless LAN Error 1 During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
302Description: Charge roller current leak The PWM duty output exceeded 60% for longer than 200 ms., indicating a leak in the charge roller current.
828Description: Self-diagnostic error 7: ROM Measuring the CRC for the boot monitor and operating system program results in an error. A check of the CRC value for ROMFS of the entire ROM area results in an error.
920Description: Printer error 1 An internal application error was detected and operation cannot continue.
669Description: NVRAM Error The NVRAM was not connected at power on, or read/write operations on the NVRAM failed.
853Description: Wireless LAN Error 1 During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
302Description: Charge roller current leak The PWM duty output exceeded 60% for longer than 200 ms., indicating a leak in the charge roller current.
828Description: Self-diagnostic error 7: ROM Measuring the CRC for the boot monitor and operating system program results in an error. A check of the CRC value for ROMFS of the entire ROM area results in an error.