Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP3510SF Top Searches

These results are ranked by popularity.

Error
202Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning.
544Description: High temperature error (hard) During stand-by mode or a print job, the detected heating roller temperature reaches 250°C.
203Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off.
545Description: Fuser full heater error(hard) The fuser full heater remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature.
204Description: Polygon motor lock signal error The signal remains HIGH for 200 ms (or 4times in 50msec polling) while the polygon mirror motor is rotating.

Ricoh SP3510SF Common Errors

The most common error codes.

Error
202Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning.
544Description: High temperature error (hard) During stand-by mode or a print job, the detected heating roller temperature reaches 250°C.
203Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off.
545Description: Fuser full heater error(hard) The fuser full heater remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature.
204Description: Polygon motor lock signal error The signal remains HIGH for 200 ms (or 4times in 50msec polling) while the polygon mirror motor is rotating.
202Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning.
544Description: High temperature error (hard) During stand-by mode or a print job, the detected heating roller temperature reaches 250°C.
203Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off.
545Description: Fuser full heater error(hard) The fuser full heater remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature.
204Description: Polygon motor lock signal error The signal remains HIGH for 200 ms (or 4times in 50msec polling) while the polygon mirror motor is rotating.