These results are ranked by popularity.
Error | |
---|---|
543 | Description: High temperature error (Software) • The detected temperature stays at 225°C for 1 second, and this consecutively occurs 10 times. |
202 | Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning. |
544 | Description: High temperature error (Hardware) • During stand-by mode or a print job, the detected heating roller temperature reaches 250° C. |
203 | Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off. |
545 | Description: Fusing Lamp Overheat Error The fusing lamps remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature. |
The most common error codes.
Error | |
---|---|
543 | Description: High temperature error (Software) • The detected temperature stays at 225°C for 1 second, and this consecutively occurs 10 times. |
202 | Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning. |
544 | Description: High temperature error (Hardware) • During stand-by mode or a print job, the detected heating roller temperature reaches 250° C. |
203 | Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off. |
545 | Description: Fusing Lamp Overheat Error The fusing lamps remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature. |
543 | Description: High temperature error (Software) • The detected temperature stays at 225°C for 1 second, and this consecutively occurs 10 times. |
202 | Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning. |
544 | Description: High temperature error (Hardware) • During stand-by mode or a print job, the detected heating roller temperature reaches 250° C. |
203 | Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off. |
545 | Description: Fusing Lamp Overheat Error The fusing lamps remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature. |