Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP3400SF Top Searches

These results are ranked by popularity.

Error
543Description: High temperature error (Software) • The detected temperature stays at 225°C for 1 second, and this consecutively occurs 10 times.
202Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning.
544Description: High temperature error (Hardware) • During stand-by mode or a print job, the detected heating roller temperature reaches 250° C.
203Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off.
545Description: Fusing Lamp Overheat Error The fusing lamps remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature.

Ricoh SP3400SF Common Errors

The most common error codes.

Error
543Description: High temperature error (Software) • The detected temperature stays at 225°C for 1 second, and this consecutively occurs 10 times.
202Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning.
544Description: High temperature error (Hardware) • During stand-by mode or a print job, the detected heating roller temperature reaches 250° C.
203Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off.
545Description: Fusing Lamp Overheat Error The fusing lamps remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature.
543Description: High temperature error (Software) • The detected temperature stays at 225°C for 1 second, and this consecutively occurs 10 times.
202Description: Polygon motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning.
544Description: High temperature error (Hardware) • During stand-by mode or a print job, the detected heating roller temperature reaches 250° C.
203Description: Polygon motor off timeout error The polygon mirror motor does not leave the READY status within 20 sec. after the polygon mirror motor switched off.
545Description: Fusing Lamp Overheat Error The fusing lamps remained ON at full capacity for more than 9 s after the fusing temperature attains reload temperature.