Ricoh SP330SFN Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh SP330SFN Top Searches

These results are ranked by popularity.

Error
SC542-02Description: Fuser reload error The fusing temperature has not reached 45°C within 9 seconds (after the fusing lamp comes ON while the machine is warming-up).
SC557Description: Zero-crossing frequency exceeded The number of zero cross signal interrupts do not reach a specified value during frequency detection.
SC202Description: Polygon mirror motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning on.
SC542-03Description: Fuser reload error The fusing unit does not attain reload temperature within a predetermined time after the fusing temperature control starts.
SC559Description: Fuser 3 times jam error The paper jam counter for the fusing unit reaches 3. The paper jam counter is cleared if the paper is fed correctly.

Ricoh SP330SFN Common Errors

The most common error codes.

Error
SC542-02Description: Fuser reload error The fusing temperature has not reached 45°C within 9 seconds (after the fusing lamp comes ON while the machine is warming-up).
SC557Description: Zero-crossing frequency exceeded The number of zero cross signal interrupts do not reach a specified value during frequency detection.
SC202Description: Polygon mirror motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning on.
SC542-03Description: Fuser reload error The fusing unit does not attain reload temperature within a predetermined time after the fusing temperature control starts.
SC559Description: Fuser 3 times jam error The paper jam counter for the fusing unit reaches 3. The paper jam counter is cleared if the paper is fed correctly.
SC542-02Description: Fuser reload error The fusing temperature has not reached 45°C within 9 seconds (after the fusing lamp comes ON while the machine is warming-up).
SC557Description: Zero-crossing frequency exceeded The number of zero cross signal interrupts do not reach a specified value during frequency detection.
SC202Description: Polygon mirror motor on timeout error The polygon mirror motor does not reach the targeted operating speed within 10 sec. after turning on.
SC542-03Description: Fuser reload error The fusing unit does not attain reload temperature within a predetermined time after the fusing temperature control starts.
SC559Description: Fuser 3 times jam error The paper jam counter for the fusing unit reaches 3. The paper jam counter is cleared if the paper is fed correctly.