Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh P800 Top Searches

These results are ranked by popularity.

Error
SC860-03Description: HDD encryption key error at main power on (HDD error) The encryption key for reading the encrypted hard disk data has failed.
SC504-02Description: Paper Feed Tray Error (Tray 4) The error signal is detected for 2 seconds consecutively after the paper feed motor is activated.
SC995-02Description: CPM setting error 2 Comparison of machine serial number (11 digits) and machine identification code. Details: Machine serial number cannot be identified because of NV-RAM replacement or malfunctioning.
SC672-12Description: Controller startup error Communication with the controller was interrupted after a normal startup.
SC152-00Description: White level adjustment error (back side) The white level cannot be adjusted to the target level during auto gain control.

Ricoh P800 Common Errors

The most common error codes.

Error
SC860-03Description: HDD encryption key error at main power on (HDD error) The encryption key for reading the encrypted hard disk data has failed.
SC504-02Description: Paper Feed Tray Error (Tray 4) The error signal is detected for 2 seconds consecutively after the paper feed motor is activated.
SC995-02Description: CPM setting error 2 Comparison of machine serial number (11 digits) and machine identification code. Details: Machine serial number cannot be identified because of NV-RAM replacement or malfunctioning.
SC672-12Description: Controller startup error Communication with the controller was interrupted after a normal startup.
SC152-00Description: White level adjustment error (back side) The white level cannot be adjusted to the target level during auto gain control.
SC995-02Description: CPM setting error 2 Comparison of machine serial number (11 digits) and machine identification code. Details: Machine serial number cannot be identified because of NV-RAM replacement or malfunctioning.
SC504-02Description: Paper Feed Tray Error (Tray 4) The error signal is detected for 2 seconds consecutively after the paper feed motor is activated.
SC672-12Description: Controller startup error Communication with the controller was interrupted after a normal startup.
SC860-03Description: HDD encryption key error at main power on (HDD error) The encryption key for reading the encrypted hard disk data has failed.
SC152-00Description: White level adjustment error (back side) The white level cannot be adjusted to the target level during auto gain control.