Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPW2400 Top Searches

These results are ranked by popularity.

Error
551Description: Pressure roller center thermistor error 1 During the hot roller temperature control sequence, or while the hot roller and pressure roller were rotating, the pressure roller center thermistor measured a value higher than 3.3V 10 consecutive t
860Description: HDD startup error at power on HDD is connected but a driver error is detected. -or- The driver does not respond with the status of the HDD within 30 s.
143Description: Scanner Automatic Adjustment Error Automatic adjustment of the CIS failed at power on.
875Description: Delete All error 2: Data area
690Description: VDB communication error There was no serial communication with the VDB within 1 sec. after power on.

Ricoh MPW2400 Common Errors

The most common error codes.

Error
551Description: Pressure roller center thermistor error 1 During the hot roller temperature control sequence, or while the hot roller and pressure roller were rotating, the pressure roller center thermistor measured a value higher than 3.3V 10 consecutive t
860Description: HDD startup error at power on HDD is connected but a driver error is detected. -or- The driver does not respond with the status of the HDD within 30 s.
143Description: Scanner Automatic Adjustment Error Automatic adjustment of the CIS failed at power on.
875Description: Delete All error 2: Data area
690Description: VDB communication error There was no serial communication with the VDB within 1 sec. after power on.
551Description: Pressure roller center thermistor error 1 During the hot roller temperature control sequence, or while the hot roller and pressure roller were rotating, the pressure roller center thermistor measured a value higher than 3.3V 10 consecutive t
860Description: HDD startup error at power on HDD is connected but a driver error is detected. -or- The driver does not respond with the status of the HDD within 30 s.
143Description: Scanner Automatic Adjustment Error Automatic adjustment of the CIS failed at power on.
875Description: Delete All error 2: Data area
690Description: VDB communication error There was no serial communication with the VDB within 1 sec. after power on.