Ricoh MPC6004 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC6004 Top Searches

These results are ranked by popularity.

Error
SC370-01, SC370-02, SC370-03Description: SC370-01 D TM (ID) sensor calibration error (F) SC370-02 D TM (ID) sensor calibration error (C) SC370-03 D TM (ID) sensor calibration error (R)
SC817-00Description: Monitor error: File detection / Digital signature erro • Bootloader cannot read any of diagnostic module, kernel, or root filesystem. • In a bootloader SD card, the digital signature checking for any of diagnostic module, kernel, or root fil
SC720-20 ... SC720-33Description: Booklet Finisher SR3240 (D3BB)/Finisher SR3230 (D3BA) Error SC720-20 Lower Junction Gate Motor Error SC720-24 Paper Exit Open/Close Guide Plate Motor Error SC720-25 Punching Motor Error SC720-27 Punch Displacement Motor Error SC720-28 Horizo
SC863-02 ... SC863-23Description: HDD data read failure The data written to the HDD cannot be read normally.
SC582-04, SC582-05Description: SC582-04 Pressure Roller Thermistor (Full-Bleed Edge) Does Not Reload After starting continuous job with paper width of 257mm or more, does not reach (T22) degrees C after specified time (sec.) SC582-05 Pressure Roller Thermistor (Full-Bleed

Ricoh MPC6004 Common Errors

The most common error codes.

Error
SC370-01, SC370-02, SC370-03Description: SC370-01 D TM (ID) sensor calibration error (F) SC370-02 D TM (ID) sensor calibration error (C) SC370-03 D TM (ID) sensor calibration error (R)
SC817-00Description: Monitor error: File detection / Digital signature erro • Bootloader cannot read any of diagnostic module, kernel, or root filesystem. • In a bootloader SD card, the digital signature checking for any of diagnostic module, kernel, or root fil
SC720-20 ... SC720-33Description: Booklet Finisher SR3240 (D3BB)/Finisher SR3230 (D3BA) Error SC720-20 Lower Junction Gate Motor Error SC720-24 Paper Exit Open/Close Guide Plate Motor Error SC720-25 Punching Motor Error SC720-27 Punch Displacement Motor Error SC720-28 Horizo
SC863-02 ... SC863-23Description: HDD data read failure The data written to the HDD cannot be read normally.
SC582-04, SC582-05Description: SC582-04 Pressure Roller Thermistor (Full-Bleed Edge) Does Not Reload After starting continuous job with paper width of 257mm or more, does not reach (T22) degrees C after specified time (sec.) SC582-05 Pressure Roller Thermistor (Full-Bleed
SC720-20 ... SC720-33Description: Booklet Finisher SR3240 (D3BB)/Finisher SR3230 (D3BA) Error SC720-20 Lower Junction Gate Motor Error SC720-24 Paper Exit Open/Close Guide Plate Motor Error SC720-25 Punching Motor Error SC720-27 Punch Displacement Motor Error SC720-28 Horizo
SC535-00Description: Paper Exit Cooling Fan Lock In the motor ON state, the value of the lock sensor is checked every 100msec. If a lock signal is not obtained for 50 times consecutively.
SC817-00Description: Monitor error: File detection / Digital signature erro • Bootloader cannot read any of diagnostic module, kernel, or root filesystem. • In a bootloader SD card, the digital signature checking for any of diagnostic module, kernel, or root fil
SC910Description: External controller error
SC665-08Description: IOB signal Communication Error The machine detects the communication error between CPU and Slave1 when starting up, or recovery from energy saver mode.