Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC5502A Top Searches

These results are ranked by popularity.

Error
720-57Description: Stack junction gate motor error The stack junction gate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
210-03Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
533-01Description: Second duct fan error 1 The machine does not detect the fan motor lock signal for 100 ms while the second duct fan turns on.
622Description: Paper tray unit communication error While the IOB communicates with an optional unit, an SC code is displayed if one of following conditions occurs. • The IOB receives the break signal which is generated by the peripherals only just after th
862Description: Bad sector number error The number of bad sectors in the HDD (image data area) goes over 101.

Ricoh MPC5502A Common Errors

The most common error codes.

Error
720-57Description: Stack junction gate motor error The stack junction gate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
210-03Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
533-01Description: Second duct fan error 1 The machine does not detect the fan motor lock signal for 100 ms while the second duct fan turns on.
622Description: Paper tray unit communication error While the IOB communicates with an optional unit, an SC code is displayed if one of following conditions occurs. • The IOB receives the break signal which is generated by the peripherals only just after th
862Description: Bad sector number error The number of bad sectors in the HDD (image data area) goes over 101.
720-57Description: Stack junction gate motor error The stack junction gate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
210-03Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
533-01Description: Second duct fan error 1 The machine does not detect the fan motor lock signal for 100 ms while the second duct fan turns on.
622Description: Paper tray unit communication error While the IOB communicates with an optional unit, an SC code is displayed if one of following conditions occurs. • The IOB receives the break signal which is generated by the peripherals only just after th
862Description: Bad sector number error The number of bad sectors in the HDD (image data area) goes over 101.