Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC5501 Top Searches

These results are ranked by popularity.

Error
990Description: Software performance error The software makes an unexpected operation.
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
770Description: Shift motor error The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.

Ricoh MPC5501 Common Errors

The most common error codes.

Error
990Description: Software performance error The software makes an unexpected operation.
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
770Description: Shift motor error The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
990Description: Software performance error The software makes an unexpected operation.
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
373Description: TD sensor adjustment error: M During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value with SP3238-001 to -004 (default: 2.7V) +- 0.2V
770Description: Shift motor error The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.