Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC5002 Top Searches

These results are ranked by popularity.

Error
653Description: Incorrect remote service ID2 ID2 stored in the NVRAM is incorrect.
880Description: File format converter error The file format converter does not respond.
230-01Description: FGATE ON error: K The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [K], [C], [M], [Y].
396-02Description: Drum/Development motor error: C The machine detects a High signal from the drum/development motor for 2 seconds after the drum/development motor turned on.
552Description: Heating roller warm-up error 2 • The heating roller temperature does not reach 80°C for 20 seconds after the inverter turned on. • The temperature at the end of the heating roller does not reach the ready temperature for 89 seconds after the

Ricoh MPC5002 Common Errors

The most common error codes.

Error
653Description: Incorrect remote service ID2 ID2 stored in the NVRAM is incorrect.
880Description: File format converter error The file format converter does not respond.
230-01Description: FGATE ON error: K The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [K], [C], [M], [Y].
396-02Description: Drum/Development motor error: C The machine detects a High signal from the drum/development motor for 2 seconds after the drum/development motor turned on.
552Description: Heating roller warm-up error 2 • The heating roller temperature does not reach 80°C for 20 seconds after the inverter turned on. • The temperature at the end of the heating roller does not reach the ready temperature for 89 seconds after the
653Description: Incorrect remote service ID2 ID2 stored in the NVRAM is incorrect.
880Description: File format converter error The file format converter does not respond.
230-01Description: FGATE ON error: K The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [K], [C], [M], [Y].
396-02Description: Drum/Development motor error: C The machine detects a High signal from the drum/development motor for 2 seconds after the drum/development motor turned on.
552Description: Heating roller warm-up error 2 • The heating roller temperature does not reach 80°C for 20 seconds after the inverter turned on. • The temperature at the end of the heating roller does not reach the ready temperature for 89 seconds after the