Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC4501A Top Searches

These results are ranked by popularity.

Error
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
990Description: Software performance error The software makes an unexpected operation.
373Description: TD sensor adjustment error: M During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value with SP3238-001 to -004 (default: 2.7V) +- 0.2V
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat

Ricoh MPC4501A Common Errors

The most common error codes.

Error
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
990Description: Software performance error The software makes an unexpected operation.
373Description: TD sensor adjustment error: M During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value with SP3238-001 to -004 (default: 2.7V) +- 0.2V
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
990Description: Software performance error The software makes an unexpected operation.
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
373Description: TD sensor adjustment error: M During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value with SP3238-001 to -004 (default: 2.7V) +- 0.2V