Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC4501 Top Searches

These results are ranked by popularity.

Error
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
990Description: Software performance error The software makes an unexpected operation.
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
770Description: Shift motor error The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat

Ricoh MPC4501 Common Errors

The most common error codes.

Error
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
990Description: Software performance error The software makes an unexpected operation.
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
770Description: Shift motor error The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat
669Description: EEPROM error Retry of EEPROM communication fails three times after the machine has detected the EEPROM error.
990Description: Software performance error The software makes an unexpected operation.
540Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
770Description: Shift motor error The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
212Description: Laser synchronizing detection error: end position [M] The laser synchronizing detection signal for the end position of LDB [K], [Y], [M], [C] is not detected for one second after the LDB unit turned on when detecting the main scan magnificat