Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC4000 Top Searches

These results are ranked by popularity.

Error
383Description: Drum gear position sensor error: Y The machine does not detect the drum position signal for 3 seconds at the drum phase adjustment.
224Description: Laser synchronizing detection error: start position [M]: LD0 The laser synchronizing detection signal for the start position of the LDB [K], [Y], [M], [C] is not output for two seconds after LDB unit turns on while the polygon motor is rotat
547Description: Zero cross error • The zero cross signal is detected three times even though the heater relay is off when turning on the main power. • The zero cross signal is not detected for 2 seconds even though the heater relay is on after turning on th
671Description: Engine board mismatch error Engine board and controller mismatch detected.
853Description: Wireless LAN card not detected The wireless LAN card is not detected before communication is established, though the wireless LAN board is detected.

Ricoh MPC4000 Common Errors

The most common error codes.

Error
383Description: Drum gear position sensor error: Y The machine does not detect the drum position signal for 3 seconds at the drum phase adjustment.
224Description: Laser synchronizing detection error: start position [M]: LD0 The laser synchronizing detection signal for the start position of the LDB [K], [Y], [M], [C] is not output for two seconds after LDB unit turns on while the polygon motor is rotat
547Description: Zero cross error • The zero cross signal is detected three times even though the heater relay is off when turning on the main power. • The zero cross signal is not detected for 2 seconds even though the heater relay is on after turning on th
671Description: Engine board mismatch error Engine board and controller mismatch detected.
853Description: Wireless LAN card not detected The wireless LAN card is not detected before communication is established, though the wireless LAN board is detected.
383Description: Drum gear position sensor error: Y The machine does not detect the drum position signal for 3 seconds at the drum phase adjustment.
224Description: Laser synchronizing detection error: start position [M]: LD0 The laser synchronizing detection signal for the start position of the LDB [K], [Y], [M], [C] is not output for two seconds after LDB unit turns on while the polygon motor is rotat
547Description: Zero cross error • The zero cross signal is detected three times even though the heater relay is off when turning on the main power. • The zero cross signal is not detected for 2 seconds even though the heater relay is on after turning on th
853Description: Wireless LAN card not detected The wireless LAN card is not detected before communication is established, though the wireless LAN board is detected.
671Description: Engine board mismatch error Engine board and controller mismatch detected.