Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC300SR Top Searches

These results are ranked by popularity.

Error
236Description: FGATE ON error: C The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [C].
860Description: HDD: Initialization error The controller detects that the hard disk fails
502Description: 2nd paper tray lift motor malfunction (optional paper feed unit) The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
635Description: Counter device error 4 A backup battery error was returned by the counter device.
721Description: Finisher jogger motor error The jogger fences move out of the home position but the HP sensor output does not change within the specified number of pulses. The 1st failure issues an original jam message, and the 2nd failure issues this SC co

Ricoh MPC300SR Common Errors

The most common error codes.

Error
236Description: FGATE ON error: C The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [C].
860Description: HDD: Initialization error The controller detects that the hard disk fails
502Description: 2nd paper tray lift motor malfunction (optional paper feed unit) The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
635Description: Counter device error 4 A backup battery error was returned by the counter device.
721Description: Finisher jogger motor error The jogger fences move out of the home position but the HP sensor output does not change within the specified number of pulses. The 1st failure issues an original jam message, and the 2nd failure issues this SC co
236Description: FGATE ON error: C The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [C].
502Description: 2nd paper tray lift motor malfunction (optional paper feed unit) The paper lift sensor did not activate within 18 sec. after the tray lift motor switched on.
860Description: HDD: Initialization error The controller detects that the hard disk fails
635Description: Counter device error 4 A backup battery error was returned by the counter device.
878Description: TPM system authentication error The system firmware is not authenticated by TPM (security chip).