Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC2530 Top Searches

These results are ranked by popularity.

Error
794Description: Rear jogger motor error with side tray (D038/D041) The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
870Description: Address book error An error is detected in the data copied to the address book over a network.
573Description: Pressure roller overheat 4 (software error) The detected pressure roller temperature stays at 230°C or more for 1 second.
442Description: Image transfer belt contact motor error The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
234Description: FGATE ON error: M The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [M].

Ricoh MPC2530 Common Errors

The most common error codes.

Error
794Description: Rear jogger motor error with side tray (D038/D041) The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
870Description: Address book error An error is detected in the data copied to the address book over a network.
573Description: Pressure roller overheat 4 (software error) The detected pressure roller temperature stays at 230°C or more for 1 second.
442Description: Image transfer belt contact motor error The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
234Description: FGATE ON error: M The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [M].
870Description: Address book error An error is detected in the data copied to the address book over a network.
442Description: Image transfer belt contact motor error The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
573Description: Pressure roller overheat 4 (software error) The detected pressure roller temperature stays at 230°C or more for 1 second.
794Description: Rear jogger motor error with side tray (D038/D041) The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
234Description: FGATE ON error: M The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [M].