These results are ranked by popularity.
Error | |
---|---|
491 | Description: High voltage power: Drum/ development bias output error An error signal is detected for 0.2 seconds when charging the drum or development. |
818 | Description: Watch-dog error While the system program is running, other processes do not operate at all. |
241 | Description: LD error: Y The BICU detects LDB error a few times consecutively when LDB unit turns on after LDB initialization. |
620 | Description: ARDF communication error After the ARDF is detected, the break signal occurs or communication timeout occurs. |
878 | Description: TPM system authentication error The system firmware is not authenticated by TPM (security chip). |
The most common error codes.
Error | |
---|---|
491 | Description: High voltage power: Drum/ development bias output error An error signal is detected for 0.2 seconds when charging the drum or development. |
818 | Description: Watch-dog error While the system program is running, other processes do not operate at all. |
241 | Description: LD error: Y The BICU detects LDB error a few times consecutively when LDB unit turns on after LDB initialization. |
620 | Description: ARDF communication error After the ARDF is detected, the break signal occurs or communication timeout occurs. |
878 | Description: TPM system authentication error The system firmware is not authenticated by TPM (security chip). |
818 | Description: Watch-dog error While the system program is running, other processes do not operate at all. |
620 | Description: ARDF communication error After the ARDF is detected, the break signal occurs or communication timeout occurs. |
491 | Description: High voltage power: Drum/ development bias output error An error signal is detected for 0.2 seconds when charging the drum or development. |
878 | Description: TPM system authentication error The system firmware is not authenticated by TPM (security chip). |
241 | Description: LD error: Y The BICU detects LDB error a few times consecutively when LDB unit turns on after LDB initialization. |