Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC2050 Top Searches

These results are ranked by popularity.

Error
870Description: Address book error An error is detected in the data copied to the address book over a network.
234Description: FGATE ON error: M The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [M].
573Description: Pressure roller overheat 4 (software error) The detected pressure roller temperature stays at 230°C or more for 1 second.
794Description: Rear jogger motor error with side tray (D038/D041) The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
442Description: Image transfer belt contact motor error The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.

Ricoh MPC2050 Common Errors

The most common error codes.

Error
870Description: Address book error An error is detected in the data copied to the address book over a network.
234Description: FGATE ON error: M The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [M].
573Description: Pressure roller overheat 4 (software error) The detected pressure roller temperature stays at 230°C or more for 1 second.
794Description: Rear jogger motor error with side tray (D038/D041) The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
442Description: Image transfer belt contact motor error The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
870Description: Address book error An error is detected in the data copied to the address book over a network.
234Description: FGATE ON error: M The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position [M].
573Description: Pressure roller overheat 4 (software error) The detected pressure roller temperature stays at 230°C or more for 1 second.
794Description: Rear jogger motor error with side tray (D038/D041) The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
442Description: Image transfer belt contact motor error The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.