Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC2011 Top Searches

These results are ranked by popularity.

Error
SC637-02Description: Tracking Information Notification Error (Management server error) Tracking information was lost.
SC911-00Description: External Controller Error 2 Notification from external application (external controller)
SC551-02Description: Edge NC Sensor Disconnection 3ED - 3FF (FB voltage: 3.243V-3.300V) is detected for (t13) seconds continuously (NC sensor center: detection & compensation NC sensor edge: detection & compensation). Detection period: 100 ms, detection frequenc
SC230-04Description: FGATE ON error: Ye. The FGATE signal did not turn ON within T1 sec. after the writing process of the corresponding color started.
SC858-31Description: Data encryption conversion error (Other Error) A serious error occurred after data conversion during an attempt to update the encryption key.

Ricoh MPC2011 Common Errors

The most common error codes.

Error
SC637-02Description: Tracking Information Notification Error (Management server error) Tracking information was lost.
SC911-00Description: External Controller Error 2 Notification from external application (external controller)
SC551-02Description: Edge NC Sensor Disconnection 3ED - 3FF (FB voltage: 3.243V-3.300V) is detected for (t13) seconds continuously (NC sensor center: detection & compensation NC sensor edge: detection & compensation). Detection period: 100 ms, detection frequenc
SC230-04Description: FGATE ON error: Ye. The FGATE signal did not turn ON within T1 sec. after the writing process of the corresponding color started.
SC858-31Description: Data encryption conversion error (Other Error) A serious error occurred after data conversion during an attempt to update the encryption key.
SC723-20Description: Junction Solenoid Motor Error (Internal Finisher: Non-Staple Bind) When the junction claw HP sensor was not turned off while T3[msec] applied to the solenoid motor with the HP sensor turned on. When the junction claw HP sensor was not turned
SC858-31Description: Data encryption conversion error (Other Error) A serious error occurred after data conversion during an attempt to update the encryption key.
SC911-00Description: External Controller Error 2 Notification from external application (external controller)
SC503-31Description: 3rd Tray Lift Error (LCIT) • Upper limit detection error (during descent) During tray initialization (upper limit detection/lower limit not detected), the tray base plate is lowered to check the tray base plate position, and the limit sensor
SC230-04Description: FGATE ON error: Ye. The FGATE signal did not turn ON within T1 sec. after the writing process of the corresponding color started.