Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC2003 Top Searches

These results are ranked by popularity.

Error
SC664-02Description: ASIC on the IOB SRAM program expansion error. Write error to ASIC on the IOB SRAM (write result error)
SC562-02Description: Pressurized Central Thermistor Does Not Reload Does not reach (T21) degree C after heater 1ON for (t3) seconds.
SC230-04Description: FGATE ON error: Ye The FGATE signal did not turn ON within T1 sec. after the writing process of the corresponding color started.
SC442-00Description: ITB Lift Error Even though the ITB lift motor (also Toner supply motor (M)) rotates, the ITB lift sensor failed to detect the specified sensor feeler status within specified time. • Contact/separation operation: If not detected in 2000msec •
SC530-00Description: Fusing Exhaust Heat Fan Lock In the motor ON state, the value of the lock sensor is checked every 100msec. If a lock signal is not obtained for 50 times consecutively.

Ricoh MPC2003 Common Errors

The most common error codes.

Error
SC664-02Description: ASIC on the IOB SRAM program expansion error. Write error to ASIC on the IOB SRAM (write result error)
SC562-02Description: Pressurized Central Thermistor Does Not Reload Does not reach (T21) degree C after heater 1ON for (t3) seconds.
SC230-04Description: FGATE ON error: Ye The FGATE signal did not turn ON within T1 sec. after the writing process of the corresponding color started.
SC442-00Description: ITB Lift Error Even though the ITB lift motor (also Toner supply motor (M)) rotates, the ITB lift sensor failed to detect the specified sensor feeler status within specified time. • Contact/separation operation: If not detected in 2000msec •
SC530-00Description: Fusing Exhaust Heat Fan Lock In the motor ON state, the value of the lock sensor is checked every 100msec. If a lock signal is not obtained for 50 times consecutively.
SC230-04Description: FGATE ON error: Ye The FGATE signal did not turn ON within T1 sec. after the writing process of the corresponding color started.
SC442-00Description: ITB Lift Error Even though the ITB lift motor (also Toner supply motor (M)) rotates, the ITB lift sensor failed to detect the specified sensor feeler status within specified time. • Contact/separation operation: If not detected in 2000msec •
SC562-02Description: Pressurized Central Thermistor Does Not Reload Does not reach (T21) degree C after heater 1ON for (t3) seconds.
SC530-00Description: Fusing Exhaust Heat Fan Lock In the motor ON state, the value of the lock sensor is checked every 100msec. If a lock signal is not obtained for 50 times consecutively.
SC721-42Description: Stapler Displacement Motor Error (1K sheet finisher) • During movement to home, the home position could not be detected within a predetermined pulse (p0 pulse) (1st time is jam notification, 2nd time is SC notification). • During movement fr