Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MPC2000 Top Searches

These results are ranked by popularity.

Error
226Description: Laser synchronizing detection error: start position [C] The laser synchronizing detection signal for the start position of the LDB [K], [Y], [M], [C] is not output for two seconds after LDB unit turns on while the polygon motor is rotating n
374Description: TD sensor adjustment error: C During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value with SP3238-001 to -004 (default: 2.7V) +- 0.2V
554Description: Pressure roller fusing lamp overheat (hardware error) The pressure roller thermistor detects 250°C or more.
763Description: Punch movement motor error The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
866Description: SD card authentication error A correct license is not found in the SD card.

Ricoh MPC2000 Common Errors

The most common error codes.

Error
226Description: Laser synchronizing detection error: start position [C] The laser synchronizing detection signal for the start position of the LDB [K], [Y], [M], [C] is not output for two seconds after LDB unit turns on while the polygon motor is rotating n
374Description: TD sensor adjustment error: C During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value with SP3238-001 to -004 (default: 2.7V) +- 0.2V
554Description: Pressure roller fusing lamp overheat (hardware error) The pressure roller thermistor detects 250°C or more.
763Description: Punch movement motor error The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
866Description: SD card authentication error A correct license is not found in the SD card.
226Description: Laser synchronizing detection error: start position [C] The laser synchronizing detection signal for the start position of the LDB [K], [Y], [M], [C] is not output for two seconds after LDB unit turns on while the polygon motor is rotating n
374Description: TD sensor adjustment error: C During TD sensor initialization, the output value of the black, magenta, cyan, or yellow TD sensor is not within the range of the specified value with SP3238-001 to -004 (default: 2.7V) +- 0.2V
554Description: Pressure roller fusing lamp overheat (hardware error) The pressure roller thermistor detects 250°C or more.
763Description: Punch movement motor error The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
866Description: SD card authentication error A correct license is not found in the SD card.